Avocet EP000
|
|
A lithium based, red, fluid grease containing extreme pressure additives designed specially for automatic pressure lubrication systems. It is particularly suitable for automatic chassis lubrication systems fitted to heavy goods vehicles, showing excellent performance even at very low temperatures.
|
Avocet L1, L2, L3
|
|
Premium quality lithium greases possessing outstanding resistance to oxidation and providing excellent corrosion protection to bearing surfaces. Long life grease, recommended for general purpose applications as well as those where the frequency of lubrication is low, such as in electrical motors and sealed for life bearings.
|
Avocet EP0, EP00, EP1, EP2, EP3
|
|
Premium quality lithium greases with the benefit of extreme pressure additives, giving excellent performance under conditions of very high or shock loads, in a variety of bearing types and over a wide temperature range.
|
Avocet LC2
|
|
Even higher performance is possible under the most severe conditions using this grease, which will satisfactorily lubricate heavy duty plain and rolling element bearings operating continuously at temperatures between -30 °C and +150 °C with short period peaks of +160 °C
|
Avocet LM2
|
|
Premium quality lithium grease containing Molybdenum disulphide (MoS2). The Molybdenum disulphide maintains a high level of lubrication and reduces wear in higher temperature applications where the grease itself may soften and migrate, or under conditions of extreme high loading or sliding friction where, again, the grease itself is forced away from the contact surface.
|
Avocet Calcium 2
|
|
A premier quality, calcium based grease for use primarily in plain bearings and general industrial applications over a wide range of conditions but with a limited temperature range of -30 °C to +55 °C. Has good pumpability in centralised lubrication systems and shows excellent corrosion resistance even in the presence of considerable quantities of water.
|
Avocet Calcium Graphite
|
|
Similar product to Avocet Calcium 2 but with the addition of a tackiness additive and finely dispersed, small particle size graphite, which acts as a solid lubricant providing good lubrication and a low coefficient of friction under extreme operating conditions, such as those encountered in lubricating the turntable/fifth wheel on articulated heavy goods vehicles, and certain marine applications where the constant presence of water is a problem.
|
Avocet Copper Anti-Seize
|
|
An extremely effective assembly compound, designed to resist corrosion and facilitate the eventual disassembly of metal components, Avocet Copper Anti-seize does not melt and is recommended for metal brake linkages as well as critical nuts and bolts and other assemblies exposed to moist conditions or very high temperatures.
|
Avocet Bitumen Range
|
|
A range of high viscosity residual type lubricants, suitable for the lubrication of open gears, certain slow speed enclosed gears, wire ropes, chains and other applications where high viscosity adhesive products are required. The heavier grades in the range normally require heating to facilitate application, especially under low ambient temperature conditions.
|
Avocet FG2 USDA H1 Approved Food Machinery Grease
|
|
A polymer-enhanced, complex high temperature food grease with supreme extra pressure and anti-wear performance. It combines anti-rust and oxidation properties with water insolubility and water washout resistance. By its nature, as a complex-soap grease, it exceeds all existing food greases in high temperature performance, adhesion and cohesion properties. Avocet FG2 has a neutral odour and is non-staining.
|
Avocet Silicone Grease
|
|
A white translucent speciality lubricant which shows excellent resistance to oxidation, water and many chemicals and solvents. Avocet Silicone Grease is virtually non-toxic, odourless, has excellent dialectric properties, and it is particularly useful where staining or contamination is a problem. Avocet Silicone Grease has been designed for the lubrication of cylinder slides, taps, valves and stopcocks.
|
A COMPREHENSIVE RANGE OF PRODUCTS COVERING MOST INDUSTRIAL AND AUTOMOTIVE APPLICATIONS REQUIRING SOLID OR SEMI-FLUID LUBRICANTS. MOST GRADES ARE AVAILABLE IN A WIDE RANGE OF PACKAGES, FROM 1.5 TONNE BULK CONTAINERS DOWN TO HIGH QUALITY 400 GM GREASE GUN CARTRIDGES.